Pellet Fireplace motors

Fireplace can bring people a lot of joy, a lot of warmth. You can imagine that a person or a group of friends, sitting next to the fireplace, happy to talk, to share each other's stories, each other's mood, this is so wonderful.

   With the improvement of environmental awareness,more and more people adopt pellet fireplace.

   There are 3 shaded pole gear motor in pellet stove motor,there is key part in the pellet fireplace.

   One is shaded pole gear motor,one shaded pole motor with a gearbox,the motor always used YJ61-25 and Yj61-30,the other is exhaust fan motor,one shaded pole motor with big metal fan blade,the other is shaded pole motor with Axial flow motor.

  If your fireplace can not work,you can check control board and this 3 motors first.

Shaded pole motor structure

like most motor, shaded pole motor also includes a circuit, magnetic and structural parts of three parts, corresponding to the basic components of the stator and the rotor core, winding, brackets and bearings.

1) The motor rotor core for constituting a magnetic circuit, wherein the alternating magnetic flux to pass.

In order to reduce iron loss, are generally mutually insulated with silicon after punching. Ningbo Jant electrical appliance co Ltd  is commonly used 50W1300, 50W800.

2) the winding enameled wire wound on bobbins concentrated winding as the main winding copper wire and welded into a short ring as a secondary winding.

 There are several rotor, in which they talk about the most commonly used cage rotor, it is washed with alveolar rotor plate after stacked and pressed into the shaft after each rotor slot aluminum or cast into made of aluminum, cast into the rotor slot and the end of the aluminum conductor inside the die to form a short-circuit cage winding. Since the resistivity of aluminum conductor for motor performance has a great impact, therefore, requires careful selection grades upon request.

3)  NingboJant electrical appliance co Ltd bracket ge generally used zinc alloy, aluminum and other non-magnetic material, such as cold-rolled steel is also useful magnetic materials such as YJ58 series metal stents, YJ80 series of metal stents. It should be emphasized that the design of the motor bracket selection must be considered when the magnetic flux leakage problems.

4) The motor has bearing, sleeve bearing and ball bearings. With oil-bearing structure is simple, low cost, low noise and energy self-lubricating, etc., are widely used in household electrical appliances with motors. Bearing in the selection according to the operating conditions to determine the appropriate form, but also strict attention to the bearing chamber machining accuracy and assembly processes.

Shaded pole motor specification

1) Voltage (V) means the motor in normal operation, the stator windings to be connected to the supply voltage. different countries and regions use a lot of different voltage, so the motor voltage specifications are also many, such as: 120V, 230V, 220V, 240V, 100V, etc., is also useful in industrial applications, 12V, 24V, 36V, 45V and so on. Supply voltage tolerance of not more than ± 5%.

2) Frequency (Hz) is the frequency of the AC power, China's power grid frequency is defined as 50 Hz, some country use 60 Hz. Frequency allows the deviation does not exceed ± 1%.

3) Power (W) means the motor is running at rated mechanical shaft output power.

Our company's (Ningbo Jant Electrical Appliance c Ltd.,)motor nameplate rated power generally refers to the maximum input power.

4) Speed ​​(RPM) indicates the motor at the rated voltage, frequency and output power to run the rotation speed. Typically, the motor speed is the speed of the motor shaft(no load), for some specialty products is often expressed through the output gear of the actual rotational speed of the shaft(on load), shaded pole motor speed is lower than the power supply frequency and Electric poles synchronous speed determined.

5) Current (A) refers to the motor is running at rated conditions stator windings of the input current can be used to check whether the motor is overloaded or defective.

6) Efficiency (η) means the motor is running at rated output power and input power ratio. Generally in the motor to reach thermal steady state, with a dynamometer directly measured the output torque and rated speed records to calculate the output power, while the motor power input is read directly from the test instrument.

7) Insulation class indicates the motor winding insulation level for determining the allowable temperature rise of the motor, commonly used insulation levels are A, E, B, F, and H five, corresponding to the maximum operating temperature of 105 ℃, 120 ℃, 130 ℃, 155 ℃ and 180 ℃.

8) Some other indicators have been specially designed or special use of the motor, but also marked on the nameplate on the technical indicators, such as work methods (continuous, short-term, intermittent cycle operation), the thermal protection in the form (impedance protection, disposable thermal Insurance protection, etc.), power factor, starting current and torque overload factor and so on

How many kinds for YJ58 series shaded pole motors

According to the thikness of lamanition,The YJ58 series motor have kinds as following:

YJ58-8  shaded pole motors

YJ58-10  shaded pole motors

YJ58-12  shaded pole motors

YJ58-16  shaded pole motors

YJ58-20  shaded pole motors

YJ58-25  shaded pole motors

YJ58-30  shaded pole motors

YJ58-35  shaded pole motors

The number following YJ58 is the thikness of shaded pole motors.

YJ58-8 shaded pole motors mean lamination is 8mm

YJ58-10  shaded pole motors mean lamination is 10mm

YJ58-12  shaded pole motors mean lamination is 12mm

YJ58-16  shaded pole motors  mean lamination is 16mm

YJ58-20  shaded pole motors mean lamination is 20mm

YJ58-25  shaded pole motors mean lamination is 25mm

YJ58-30  shaded pole motors mean lamination is 30mm

YJ58-35  shaded pole motors mean lamination is 35mm

About shaded pole motors

Convert electrical energy into mechanical energy (this is called motor); or the mechanical energy into electrical energy (this is called the generator); or to one form of energy into another form of energy (this is called the transformer ), etc. All of these energy conversion can be achieved in such a device referred to the motor.

The basic principle of the motor is the application of the two laws: the Faraday's law of electromagnetic induction and Ohm's law, following the same law of energy conservation.

Motors have AC motors, DC motors and AC /DC motors. AC motor is divided into induction motor, synchronous motor.

Our company Ningbo Jant electrical appliance co Ltd produce a shaded pole motor that is an induction motor, stepper motor is a synchronous motor, also known as a pulse motor, series motor can be designed as AC and DC motors.

Generally refers to the so-called micro-motor input power 1000W motor below, while the input power is less than 750W micro-motor is also known as fractional horsepower motors.

We produce a shaded pole motor is a single-phase induction motor drives a micro, its structure is extremely simple, generally salient pole stator windings of the primary winding is concentrated, and the surface of each magnetic pole has opened a small groove, which put short inlay ring (or shaded pole coil) as the secondary winding, and its function is to short-circuit loop of the magnetic force of the covering phase, thereby forming a magnetic field generating ellipse orientation starting torque, the motor start. This motor has a simple structure, convenient and suitable for mass production and low cost advantages, but also running, low noise, no radio interference.

The disadvantage is poor operating performance and starting performance, efficiency and low power factor. It is generally used to load or light load starting small-capacity applications, such as electric fans, electric fans and Instrument model and other products.

Stepper motor(24BYJ48,28BYJ48,35BYJ46)

Stepper motor(24BYJ48,28BYJ48,35BYJ46) always be used in small electrical appliance need wind sweep,such as air-conditiong,fan heater.The air-conditiong in our home,The wind weep from left to right is used synchronous motor,but up and Down is used stepper motor.The stepper motor also used in Baby monitor.

synchronous motors

Synchronous motor always be used in small electrical appliance need wind sweep,such as Fan heater,air-conditioning,Micro-wave oven,this motor also be used in air-conditiong valve

shaded pole motor(YJ58,YJ48,YJ61),

 shaded pole motor(YJ58,YJ48,YJ61),This series motor always used in small ventilation fan,such as:Fan heater,Duct fan,Ventilation fan,Air-purifiers,Bathroom Fan,Humiditfier,Mosquito killer,Feet Care,Kitch fan,Axia Fan,Freezer,Refrigerate,Pump.etc

BY:Ningbo Jant electrical appliance co Ltd

Shaded pole motor speed.Single phase Shaded pole motor with 4 pole,so his speed is about 2000- 3000RPM,It is depend on motor’s pole number,At the same time,When motor is on load,The speed will change.For samples,The Mosquitto Killer motor will need the motor lower the ventilation fan,The Mosquitto killer will need motor on load speed 1450RPM, But the ventilation fan will need speed on load 1880,we made motor according to your requirement,So we always need you tell me what appliance you used our motor and give us drawing.which will shorten the sanmples leading time

Shaded pole motor speed.Single phase Shaded pole motor with 4 pole,so his speed is about 2000-                  3000RPM,It is depend on motor’s pole number,At the same time,When motor is on load,The speed will                   change.For samples,The Mosquitto Killer motor will need the motor lower the ventilation fan,The Mosquitto                   killer will need motor on load speed 1450RPM, But the ventilation fan will need speed on load 1880,we made                   motor according to your requirement,So we always need you tell me what appliance you used our motor and give us drawing.which will shorten the sanmples leading time

Shaded pole motor speed.

Shaded pole motor speed.Single phase Shaded pole motor with 4 pole,so his speed is about 2000-                  3000RPM,It is depend on motor’s pole number,At the same time,When motor is on load,The speed will                   change.For samples,The Mosquitto Killer motor will need the motor lower the ventilation fan,The Mosquitto                   killer will need motor on load speed 1450RPM, But the ventilation fan will need speed on load 1880,we made                   motor according to your requirement,So we always need you tell me what appliance you used our motor and give us drawing.which will shorten the sanmples leading time

How to choose ventilation fan

Ceiling ventilation fans appearance beautiful, usually installed in the ceiling of the room, it consists of three parts: fans, shaded pole motors and pipes.

Ceiling ventilation fans pipeline generally shorter, the user in the installation also require additional purchase of one supporting the pipeline length of the ventilation tube, ventilation tube in accordance with the ventilation fans to the bedroom to the length of the outlet.

 

Ceiling exhaust fan is a one-way operation, the indoor air out of the tube, and then through the pipeline and pipe connecting ventilation air is exhausted to the outside. Ceiling ventilation fan prices are generally at RMB100.

 Ceiling ventilation fans, though beautiful, running the length of the pipeline weaken the extraction of the intensity of the indoor air, the other point is it can only be out of indoor air, and can not fresh outdoor air coming up, so in the kitchen(poor air quality) not suitable for ceiling ventilation fans.

In the living room  are generally more lenient windows, indoor and outdoor air circulation is relatively easy, more suitable for ceiling ventilation fans.

BY :(Ningbo Jant electrical appliance co ltd   www.vent-motor.com)

 

Pellet Fireplace motors

Fireplace can bring people a lot of joy, a lot of warmth. You can imagine that a person or a group of friends, sitting next to the fireplace, happy to talk, to share each other's stories, each other's mood, this is so wonderful.

   With the improvement of environmental awareness,more and more people adopt pellet fireplace.

   There are 3 shaded pole gear motor in pellet stove motor,there is key part in the pellet fireplace.

   One is shaded pole gear motor,one shaded pole motor with a gearbox,the motor always used YJ61-25 and Yj61-30,the other is exhaust fan motor,one shaded pole motor with big metal fan blade,the other is shaded pole motor with Axial flow motor.

  If your fireplace can not work,you can check control board and this 3 motors first.

 

By Ningbo Jant electrical appliance co Ltd

What is Shaded pole motors?

Shaded pole motor is the most simple single phase AC motor, usually  aluminum rotor. It is different based on the stator shape and structure.

 

The salient-pole shaded pole motor,which stator core shape is square, rectangular or circular magnetic framework, the magnetic pole projecting on each pole were short copper ring by one or more supporting role, i.e. shaded pole windings. The concentrated winding salient pole as the primary winding.

 

When the primary winding is energized shaded pole motor, shaded pole winding will produce the induced current, covering pole winding part of the magnetic flux to not cover part.

The advantage is a simple structure without additional winding and capacitor.

 

By:Ningbo Jant electrical appliance co Ltd.

The difference between synchronous and asynchronous

The difference betiween synchronous and asynchronous is rotor and stator rotating speed with the magnetic field, if the rotor  and stator speed is the same, it is called synchronous motor, and if not, is called asynchronous motor.

when the number of pole is fixed, the motor speed and frequency have fixed too that is synchronous motor. Asynchronous motors, also called induction motor, the rotor speed work is always less than the synchronous motor.

So-called "synchronous" is the winding current flowing in the armature (stator), Form a rotating magnetic field in the air gap, while  the direction of rotation and the rotation speed of the magnetic field is same, the same speed, so for synchronization. Asynchronous motor, the rotating magnetic field and the rotor there is a relative speed, which produce torque

How the single phase shaded pole motor work?

Shaded pole motor has two shaded pole ring (also called short-circuit ring), shaded pole ring can hinder the transfer of magnetic field lines in a magnetic field, The part no shaded pole ring is stronger than the part have shaded pole ring of the magnetic field strength, which form a rotating magnetic , the difference of magnetic field  force on it, this cases will have a rotational force acting on the rotor, which is to make motor start work.

As single phase shaded pole motor coil through single-phase AC power, we know that the spread of the single-phase AC power is a form of a sinusoidal AC curve.

Take 220v 50hz(china market) for example its direction can transform 50 times in one second.we know that when we pass into the shaded pole coil voltage, power coil will produce the direction of the magnetic field, the magnetic field lines and current direction is closely related to the direction of the right-hand rule to determine the magnetic field lines.

 

 

 

By:Ningbo Jant electrical appliance co Ltd

The difference between Induction motor and shaded pole motor

Induction motor, also known as "asynchronous motor, it is mean  the rotor is placed in rotating magnetic field, under the action of the rotating magnetic field, to obtain a rotational torque, then make  the  rotor move.

The rotor is rotatable conductor, usually mostly squirrel cage shaped.

The stator  is not rotated, the main task is to produce a rotating magnetic field.

Rotating magnetic field is not achieved by mechanical but an alternating current in the number of the electromagnet,  the nature of the magnetic pole cycle change, it is equivalent to a rotating magnetic field.

This motor not as DC motor brushes or the current collector ring, based on the single-phase motors and three-phase motor with a kind of the AC single-phase motor is used in such as washing machines, electric fans, etc.; three-phase motor as the driving force of the factory device.

Shaded pole motor (Shaded Pole Motor) is the simplest kind of single-phase AC motor, usually cage chute cast aluminum rotor. It is based on the stator shape the structure of different, such as YJ58 motor,YJ61motor,YJ82 motor,YJ84 motor,YJ48 motor.is divided into salient pole shaded pole motor and salient pole shaded pole motor.

 

By:Ningbo Jant electrical appliance co ltd